Van Horn Aviation | Composite Rotor Blades
Van Horn Aviation | Composite Rotor Blades

Accessories

service & repair

Service Items Available Through VHA

GET IN TOUCH
Service and Repair

Available Items

ITEM DESCRIPTION
WC-6TG-10 Aurora Bearing for 206 series tail rotor blade (P/N 2062200-ALL)
RST 2153 Tri-Roller Swaging Tool and Locating Fixture for installing bearings
206R2200-10 206TR Bearing Removal Tool Kit
206C31412-13 Trim Tab Zeroing Tool for 206B and 206L main rotor blades
Tie Down Straps See Bruce's Covers Below
20631341-1 206 Main Rotor Blade Grip pad
20631341-1 206 Main Rotor Blade Wear pad
NAS1804-12 206 Main Rotor Blade Nut
20630931-1KIT Tracking Wedge Kit
T350TR1000-20 AS350 Shaft Extension Puller Tool
T350TR1000-30 AS350 Static Balance Adapter (will be available via helicopterworkaids.com)
T350TR1000-40 AS350 Static Bubble Balancer (will be available via helicopterworkaids.com)

Bruce's Custom Covers

206B-310: Rotor Hub/Drive Shafts Cover

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.

VIEW PRODUCT

206B-415: VHA Blade Covers (Set of 2)

Made from medium-weight Solution-Dyed Polyester and designed to avoid contact with trim tabs or wicks. Installed from the ground using a lightweight rope, they cinch at the root with quick-release buckles. Cold Weather Covers include full-length zippers and optional deice boots for preheater hoses.

VIEW PRODUCT

206B-310: Rotor Hub/Drive Shafts Cover

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.

VIEW PRODUCT

206B-415: VHA Blade Covers (Set of 2)

Made from medium-weight Solution-Dyed Polyester and designed to avoid contact with trim tabs or wicks. Installed from the ground using a lightweight rope, they cinch at the root with quick-release buckles. Cold Weather Covers include full-length zippers and optional deice boots for preheater hoses.

VIEW PRODUCT

206B-520: VHA Blade Tie-Downs W/Telescoping Attachment Handle, (Set of 3)

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot. The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional cost.

VIEW PRODUCT

206B-520: VHA Blade Tie-Downs W/Telescoping Attachment Handle, (Set of 3)

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot. The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional cost.

VIEW PRODUCT

Contact us to elevate your operations!